X33 - 330 Denier X-Pac™ Expedition Series Laminated Nylon Fabric - MultiCam® Camo (Sold per Yard)
Sold Per Yard
X33 uses a 330 denier CORDURA® nylon. The combination of X-Pac™ Ripstop Polyester, Hydro State waterproof construction technology, and 330 denier nylon fabric face provides an extremely abrasion resistant, waterproof, tear resistant fabric.
The X33 is almost the same as the VX33 with the exception of the 0.5mil PET film on the backside instead of a woven polyester. This is more flexible than the VX33 series.
|7.9 oz/sq yd||23 LB||18.9 LB||>200 psi|
|267.8 g/sq m||102.3 N||84.1 N||>13.8 bar|
- 330 denier CORDURA® Nylon printed in MultiCam® camouflage pattern
- Black polyester X-Ply™ fabric at 22° offset
- 0.5 mil PET film
- Durable water repellent finish
*All X-Pac products ship on a roll.
Made in the USA
*Except 1st Class to Canada and FedEx International Mail Service
330 Denier X-Pac™ Expedition Series Laminated CORDURA® Nylon Fabric - MultiCam® Camo
|Nominal Width (Inches)||54 inch (137cm)|
|Nominal Fabric Weight (Oz/ Sq Yd)||7.9|
|Sales Unit||Linear Yard|
|Suggested Needle||Jeans 100/18|
|Thread Suggestion||Bonded Nylon or all Polyester, T45 to T70|
|Country of Origin||Non-USA|
Information and documents provided on this website are provided "as is" without warranty of any kind, either expressed or implied, including limitation warranties of merchantability, fitness for a particular purpose, and non-infringement. Rockywoods Fabrics LLC uses reasonable efforts to include accurate and up-to-date information on this Web site; it does not, however, make any warranties or representations as to its accuracy or completeness. Rockywoods Fabrics LLC periodically adds, changes, improves, or updates the information and documents on this website without notice.
Dimension-Polyant (X-PAC) Fabrics Care Tips
Dimension-Polyant fabrics are incredibly strong and tough but they do take special cleaning care. These instructions apply to all XSUEDE, VX and TX laminated fabrics.
- DO NOT machine wash or machine dry. This will severely affect the material properties, and may cause delamination.
- Do not use bleach, solvents or other harsh chemicals
- Use mild soap and water to wash
- Rub with a soft cloth or sponge
- Rinse with fresh water
- Hang to dry