4.0mm Neoprene® Sharkskin - Bare on one side (Sold per Foot)
Sold Per Foot4.0mm Neoprene® Sharkskin - Bare on other side
This has what appears to be a residue on the face to keep it from sticking to itself when rolled. This residue can easily be cleaned off as seen in the pictures.
This has been reduced even further for the inconvenience of it being dirty.
4.0mm Neoprene® Sharkskin - Bare on one side Roll #11
|Nominal Width (Inches)||49-50 inch (124-127cm)|
|Nominal Fabric Weight (Oz/ Sq Yd)||29|
|Sales Unit||Neoprene Foot|
|Care Instruction||Neoprene Care|
|Country of Origin||Non-USA|
Information and documents provided on this website are provided "as is" without warranty of any kind, either expressed or implied, including limitation warranties of merchantability, fitness for a particular purpose, and non-infringement. Rockywoods Fabrics LLC uses reasonable efforts to include accurate and up-to-date information on this Web site; it does not, however, make any warranties or representations as to its accuracy or completeness. Rockywoods Fabrics LLC periodically adds, changes, improves, or updates the information and documents on this website without notice.
Neoprene Fabric Care Tips
Neoprene is waterproof so you need to make sure all inner surfaces can air dry to avoid old and mildew.
- Warm water wash wusing mild soap and hang dry.
- Do not iron or press.
- If stained, use only non-chlorine bleach.
If necessary, you can reseal seams with either AquaSeal, SKU 10110, or seam tape, SKU MELCO-TQ5000-Black.