10.0mm B Foam Neoprene (Sold per Foot)
Sold Per Foot
Neoprene® synthetic rubber or polychloroprene is a family of synthetic rubbers that are produced by polymerization of chloroprene. Neoprene exhibits good chemical stability, and maintains flexibility over a wide temperature range. B Foam Neoprene is used in a wide variety of applications, such as laptop sleeves, orthopedic braces (wrist, knee, etc.) for both humans and animals, insulating and protective covers.1
B Foam Neoprene is made of approximately 70% SBR and 30% CR Neoprene rubber. Although not as resistant to ozone as 100% CR neoprene rubber sheets, pricing is much more competitive. B Foam Neoprene is made in sheets that are approximately 47" x 85" ±5% in size. They are typically covered on both sides by a light nylon or polyester tricot mesh. The neoprene thickness is approximately 10mm and so the total thickness including the 2 mesh covering sheets is 10.9mm.
1Wikipedia, Neoprene is a registered trademark of DuPont.
10.0mm B Foam Neoprene
|Nominal Width (Inches)||47 inch (119cm) ±5%|
|Nominal Fabric Weight (Oz/ Sq Yd)||87|
|Sales Unit||Neoprene Foot|
|Care Instruction||Neoprene Care|
|Suggested Needle||Jeans 100/18|
|Thread Suggestion||Bonded Nylon or all Polyester, T14 to T45|
|Country of Origin||Non-USA|
Information and documents provided on this website are provided "as is" without warranty of any kind, either expressed or implied, including limitation warranties of merchantability, fitness for a particular purpose, and non-infringement. Rockywoods Fabrics LLC uses reasonable efforts to include accurate and up-to-date information on this Web site; it does not, however, make any warranties or representations as to its accuracy or completeness. Rockywoods Fabrics LLC periodically adds, changes, improves, or updates the information and documents on this website without notice.
Neoprene Fabric Care Tips
Neoprene is waterproof so you need to make sure all inner surfaces can air dry to avoid old and mildew.
- Warm water wash wusing mild soap and hang dry.
- Do not iron or press.
- If stained, use only non-chlorine bleach.
If necessary, you can reseal seams with either AquaSeal, SKU 10110, or seam tape, SKU MELCO-TQ5000-Black.